Cameras
For remotely triggering the electronic shutter release of cameras with a Nikon 10-pin Remote Terminal.
Cable length: 3' (91.5 cm)
From Nikon 10-pin Remote Terminal
To 1/8" (3.5 mm) Stereo Miniphone
For MultiMAX with ACC port. This cable will NOT work with the Plus II. This -ND cable contains a "no diode" circuit necessary only for the Nikon D700, but will work with other Nikon cameras as listed. It will not work with the Nikon D200 or D100 w/ MB-D100. Use the N90M-ACC cable for those cameras.
-ACC Cables are a special kind of Pre-Trigger cable for use with the new FlexTT5 or the latest MultiMAX. Toggle Pre-Trigger on and off remotely with the MultiMAX. Required for remote camera triggering with a FlexTT5 if using E-TTL functions. NOTE: An older mono motor drive cable and/or pre-release cable can be used instead of an -ACC cable with a FlexTT5 but you will not have E-TTL capability.
Compatible with cameras using Nikon 10-pin Remote Terminal including:
N90
D2X
N90S
D2Xs
F5
D2H
F6
D2Hs
F100
D3
D1
D300
D1X
D700
D1H
The following equipment can work with the Pocket Wizard Remote Cable - Nikon -
| Daily Hire | £1.67 (£2.00) | Weekend Hire | £3.33 (£4.00) |
| Weekly Hire | £7.50 (£9.00) | 2 Weekly Hire | £11.67 (£14.00) |
| 3 Weekly Hire | £15.00 (£18.00) | Deposit | £25.00 |
Prices shown above as Ex VAT in black (Inc VAT in red). These prices are for hire only - courier charges will apply. All equipment will be delivered by 12pm on the day before the hire period and collected the day after the hire has finished. For more details, visit our How to Hire section.
