Cameras
Sony LMD-9020
8.4 Inch LCD monitor with composite input for SD and component input for HD
The new LMD-9020 is 8.4 inch LCD monitor aimed at broadcast and professional applications.
LMD-9020 is a one-piece style monitor for video standard definition. It can be AC, DC, or battery driven so that it can be hand-held, situated on a desk, or mounted in standard racks.
Control buttons, input and output, monitor stand are all combined with the LCD panel to achieve an all-in-one design.
With high-grade LCD panel, the LMD-9020 offers a range of interfaces on its rear panel, from analogue composite, Y/C and analogue component.
This monitor can also accept High Definition video signal in component analogue format.
LMD-9020 is designed to meet a wide range of picture monitoring demands in professional applications such as broadcast stations, OB vehicles, post-production studios, and digital photo studios.
Input Versatility
The LMD-9020 provides all inputs as standard, keeping the unit simple and clean. For typical SD video monitoring, the LMD-9020 provides interfaces for analogue composite (NTSC/PAL), analogue component, RGB (525/60i and 625/50i) and Y/C (S-Video). High Definition signals can also be displayed in the analogue component form.
AR (anti reflection) Coated Protection Panel
This monitor uses a robust AR-coated protection layer, which minimises the chance of the panel being scratched during transportation – an extremely important criteria for use in the field or in any mobile application. The AR coating additionally has two unique characteristics: it provides a high transmission rate of the internal light source to keep the picture as bright as possible, and it keeps reflection from ambient light to a minimum. As a result, when used in bright lighting conditions, high contrast is still maintained even in dark areas of the picture.
Advanced Marker Settings
This monitor can display various area markers, including a centre marker and aspect markers. The brightness of these markers can be selected from three different levels, white, grey, and dark grey, and their width can be selected from FINE, STANDARD, and BOLD. What’s more, users can select either a black or grey matte to fill the outer area of the aspect markers. These flexible marker controls together with the choice of many different aspect markers, make the LMD-9020 monitor extremely convenient for a variety of shooting scenarios.
Selectable Scan Size for Video Input and Aspect Ratio
The screen size can be selected between 5% over-scan, 0% zeroscan and –3% underscan modes. The aspect ratio can be switched between 16:9 and 4:3 according to input signals.
Three Colour Tally
The tally lamp can be lit up via a parallel remote connector and the status of the signal displayed on the monitor can be identified by tally colour - red, green or amber.
| Type | a-Si TFT Active Matrix LCD with a multi-layer AR-coated protection panel |
| Resolution | 640 x 680 dots |
| Pixel efficiency | 99.99% |
| Picture Size (H x W) | (Viewable area) Approx. 170.9 x 128.2 mm, (Approx. 6 3/4 x 5 1/8 inches) (Diagonal) 213.6 mm (8.4-inch) |
| Aspect | 4:3 |
| Colours | 16,770,000 colours |
| Viewing Angle | 85°/85°/85°/85° (typical) (up/down/left/right contrast>10:1) |
| Input Line A | Composite BNC x 1, 1.0 Vp-p +3dB, -6 dB sync negative 4-pin mini-DIN x 1 Y/C Y : 1.0 Vp-p + 3dB, -6 dB sync negative C : 0.286 Vp-p ±3 dB (NTSC), 0.3 Vp-p ±3 dB (PAL) Audio Mini jack x 1, -5 dBu 47 kO or higher |
| Input Line B | Composite BNC x 1, 1.0 Vp-p +3 dB, -6 dB sync negative Audio Mini jack x 1, -5 dBu 47 kO or higher |
| RGB/ RGB/Component | BNC x 3, RGB input : 0.7 Vp-p +3 dB, -6 dB Component (Sync On Green, 0.3 Vp-p sync negative) Component input : 0.7 Vp-p +3 dB, -6 dB (75% chrominance standard color bar signal) |
| Audio Mini jack x 1 | -5 dBu 47 kO or higher |
| Ext.sync BNC x 1 | 0.3 to 4 Vp-p ± bipolarity ternary or negative polarity binary |
| Remote Parallel remote Modular connector 8-pin | 1(Assignable) |
| Output Line A | Composite BNC x 1, Loop-through, with 75 O automatic termination Y/C 4-pin mini-DIN x 1, Loop-through, with 75 O automatic termination |
| Output Line B | Composite BNC x 1, Loop-through, with 75 O automatic termination Audio output Mini jack x 1, Loop-through |
| Audio Output | Mini jack x 1, Loop-through |
| Headphones output | Mini jack x 1(Monaural), Loop-through |
| Speaker output | 0.5 W (Monaural) |
| Power Consumption | Approx. 15 W, With AC Adaptor : Approx. 20 W |
| Power requirement | AC 100 to 240 V, 50/60 Hz, 0.82 to 0.42 A, DC 12 V 1.5 A, Rechargeable Battery Pack |
| Operating Temperature | 0 to 40 °C |
| Operating Humidity | 30 to 85 % (No condensation) |
| Operating Humidity | 30 to 85 % (No condensation) |
| Operating/Storage/Trans. Pressure | 700 to 1060 hPa |
| Storage & Transport Temperature | -20 to 60 °C |
| Storage & Transport Humidity | 0 to 90 % |
| Dimensions (W x H x D) | Approx. 216 x 206 x 136.1 mm (8 5/8 x 8 1/8 x 5 3/8 inches) |
| Mass | Approx. 2.8 Kg (6 lb 3 oz) |
| Daily Hire | £40.00 (£48.00) | Weekend Hire | £59.17 (£71.00) |
| Weekly Hire | £147.50 (£177.00) | 2 Weekly Hire | £231.67 (£278.00) |
| 3 Weekly Hire | £301.67 (£362.00) | Deposit | £500.00 |
Prices shown above as Ex VAT in black (Inc VAT in red). These prices are for hire only - courier charges will apply. All equipment will be delivered by 12pm on the day before the hire period and collected the day after the hire has finished. For more details, visit our How to Hire section.
