Adding item to the basket... 
If we were to use one word to describe these shoulder rigs it would be balance! You cannot shoot with a rig that is not balanced, you’ll be fighting fatigue on long shoots. Whether you’re shooting TV, film, documentaries, weddings or news, a balanced shoulder mounted rig will keep your shots steady and allow you to shoot the whole day.
The Zacuto Next Generation Rig is compatible with many cameras including mirrorless and DSLRs. It includes the VCT Pro baseplate which will help you balance your rig and is universal for all cameras (size and weight allowing). The QR Riser raises the camera to a height compatible with matte boxes. It also allows you to quick release your camera and mount it to a tripod in seconds. The Zgrip Zwivel fully articulating handgrip gets your hand in the most comfortable position. Wrapping around the side and top of the rig is the Halfcage Rail and Recoil Handle.
The Zacuto Next Generation Rig is made up of the following items:
• Zacuto VCT Pro Baseplate
• Zacuto QR Riser
• Zacuto 3” Z Rail
• Zacuto Half Cage Rail
• Zacuto Axis Mini
• Zacuto Zgrip Z-Mount Zwivel
• Zacuto Recoil Handle
| Description | Quantity |
|---|---|
| QR Riser | 1 |
| - Large Red Thumb Screw | 1 |
| - 1/4 Screw | 1 |
| - Gorilla Plate V2 | 1 |
| - Tripod Dock with 15mm Stud Rod and Locating Pin | 1 |
| 3" Z-Rail | 1 |
| - 1/4 Screw | 2 |
| Half Cage | 1 |
| - Allen Key | 1 |
| - Large Red Thumb Screw | 2 |
| - Allen Key Screws (attached) | 14 |
| - 5" Z-Rail | 1 |
| - 2 Screws (on Z-Rail) | 2 |
| - Wooden Handle | 1 |
| - Rail grip (attached to handle via Allen bolts) | 1 |
| - Long rail section (attached to handle via Allen bolts) | 1 |
| Axis Mini | 1 |
| - Small Red Thumb Screw / Small Red Thumbs Screw x 2 | 3 |
| - Paperwork | 1 |
| - 3 inch rod (for linking to Zacuto rigs) and attaching hex bolt | 1 |
| - Black thumb screw | 1 |
| - Supplement section (for attaching rod mounted viewfinders). | 1 |
| Zgrip Z-Mount Zwivel | 1 |
| - Small Red Thumb Screw / Small Red Thumbs Screw x 2 | 3 |
| - 15mm Rod Mount Bracket | 2 |
| - Handle with 6 Screws | 1 |
| - 4.5 Inch Rod with Ball Mount | 1 |
| Recoil Handle | 1 |
| - Small Red Thumb Screw / Small Red Thumbs Screw x 2 | 4 |
| - Cold Shoe Accessory Jaws | 1 |
| - Z-Rail Jaws | 1 |
| - Allen Bolts | 12 |
| - Cross Head Screws | 2 |
| VCT Pro Baseplate | 1 |
| - Allen Key | 1 |
| - Small Red Thumb Screw / Small Red Thumbs Screw x 2 | 1 |
| - Large Red Thumb Screw | 2 |
| - 1/4 Screw | 1 |
| - 3/4 screw | 1 |
| - USB Drive (Containing Manual) | 1 |
| - Allen Key Screws (attached) | 7 |
| - Sliding Red Plate (Quick Release) | 1 |
| - 15mm Rod | 2 |
| - VCT Wedge Tail (with 2 cross head screws) | 1 |
| - Tail Hook (with 4 cross head screws) | 1 |
| - Washer | 5 |
| - Cross head screws to main unit (under slip plate) | 3 |
| - Side mounting bracket (with 3 connecting screws) | 1 |
Viewfinder / monitor not included.
Takes 15mm rods/rails.
© 2003-2024 Hireacamera.com - all rights reserved
