Teradek Bolt 4K LT 750 TX/RX is a revolution in wireless video featuring the best reliability and image quality in the industry.
Real-Time 4K Wireless Video
Transmit uncompressed video in 1080p and 2160p at 60FPS with less than 1ms of delay. Up to 750 ft. of range.
True HDR Colour
Bolt 4K is compliant with the HLG, PQ, and HDR-10 standards, making it an invaluable tool on set for HDR workflows.
Bolt 4K features 8x the wireless performance of previous Bolt generations, ensuring video is delivered in even the toughest of RF environments.
Each transmitter can send video to up to 6 receivers. Compatible with any model in the Bolt 4K line.
• Transmitter: 1x 12G-SDI, 1x HDMI 2.0, 1x 12G-SDI looping output.
• Receiver: 2x 12G-SDI, 1x HDMI 2.0
Supplied with both an LP/E6/ NPF770 battery plate and a V-Mount Battery plate.
Send start / stop flags, timecode, and other ancillary data over the wireless link. On the receiver side, upload and apply custom 3D LUTs to monitor each take with the look you’re after.
Bolt App for iOS and Android
Remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The Bolt App uses Bolt 4K’s integrated Bluetooth to give you all of its settings in the palm of your hand.
|RP-NPF770 (Sony NP-F) Battery Pack||2|
|RP-DC50 Dual Battery Charger (Sony NP-F type)||1|
|- Mains Lead (for Battery Charger)||1|
|- RP-DFM50 Battery Plate||2|
|- AC 12V Car Light Power Cable||1|
|- RP-DC50 LCD Digital Charger||1|
|2 x V-Lok + Twin Charger Kit||1|
|- 95Wh V-Lok Battery Pack||2|
|- Twin sequential V-Lok Charger||1|
|- Kettle Lead||1|
|Bolt 4K 750 TX/RX kit||1|
|- Receiver unit||1|
|- Transmitter unit||1|
|- Mains power to leno cable (with removable UK plug connection)||1|
|- Removable antennas||7|
|- Light stand mount (complete with 1 x bolt and 1 x thumb screw)||1|
|- Flight case||1|
|- Static shoe mount||1|
|- Ultra Thin HDMI Male Type A (Full) to HDMI Male Type A (Full) Cable - 18in||2|
|- 2pin Connector to PowerTap Cable (P-Tap/D-Tap) - 18in||1|
|- Micro-USB (5pin) to USB Cable (Firmware Cable) - 36in||1|
|- 3G-SDI (BNC to BNC) Cable - 10in||2|
|- Battery plate for transmitter unit (complete with L shaped bracket and 6 mounting screws)||1|
|- V-Lock battery plate for receiver unit (complete with 4 attachment screws)||1|
|- Leno to DC power cable (for battery plate)||1|
The transmitter and receiver units, use different types of battery. The transmitter unit uses LP-E6 or Sony NP type battery packs. The receiver uses V-Lok battery packs. Batteries cannot be interchanged between the transmitter and receiver.
The official range for this product as specified by Teradek is 750 feet (approx. 225m). This range is based on perfect conditions i.e. the receiver being in an elevated position, with 100% line of sight. These conditions are rarely achievable in real world situations and the achievable range may be less than stated. Every time the signal passes through an obstruction e.g. a wall, vehicle, person. etc – the signal will be degraded and the overall range will be reduced.