One-touch ease-of-use wireless audio set that utilizes a digital transmission to seamlessly link audio sources. Equipped with XLR and 3.5mm (1/8”) transmitters, this elegant solution makes capturing dialogue on a DSLR easier than ever before while maintaining a reliable connection.
• One touch ease-of-use
• 2.4 GHz digital transmission for worldwide operation
• 75m range (250ft) in optimal conditions
• Up to 5 hours battery life on a single charge
• Switch between multiple transmitters linked to one receiver
• Configure any combination of transmitters and receivers*
• Mute from either transmitter or receiver
*NB: Please check included section for what is supplied.
Excellent live sound.
XS Wireless 1 delivers acclaimed Sennheiser quality. Microphones with feedback protection and high-grade components yield an open, forceful sound. The receiver is an updated version that is designed to be easy to use. No lengthy set up – just go! These microphones and transmitters are proven classics – the result of decades of German engineering.
On stage, you have to put up with a lot of things – so does your equipment. XS Wireless 1 is built to last: Transmitters and microphones are sweat-resistant and withstand even the toughest stresses in everyday on-stage use.
Entry-level but well equipped
XSW-D employs digital transmission in the 2.4 GHz range and uses the acclaimed aptX® Live codec. The receivers have antenna diversity; the transmitters work redundantly, transmitting all data packages twice to ensure reliable transmission. In case of interference, the transmitter and receiver will seamlessly hop to a free frequency. The audio latency remains below 4 ms. Up to five systems can be used simultaneously and they have a range of up to 75 m (250 ft). The transmitter and receiver units can be conveniently recharged via USB using the included charging cable and work for up to five hours on a single charge.
Operation has been made as easy as possible via a single button: Pressing the buttons on both the transmitter and the receiver will power up and automatically link the units, clicking either button on the receiver or transmitter will mute the audio signal and pressing and holding both buttons again will power the system down.
The transmitter is connected to a handheld mic, a lavalier mic or an instrument, while the receiver can be directly connected to a mixing desk, a guitar or bass amp or the mic input of a video camera respectively.
Performing and presenting
Presenters, vocalists and instrumentalists can choose between a Vocal Set with an XS 1 dynamic cardioid microphone, a Lavalier Set with an ME 2-II clip-on microphone, and an Instrument Base Set for instruments with a 6.3 mm (1/4”) output. Also available is an XLR Base Set for usewith existing dynamic microphones, and a Presentation Base Set for use with an existing clip-on microphone that has a 3.5 mm (1/8”) mini-jack connector. From Summer 2019, the series will be expanded with a Pedalboard Set for guitar and bass players. All transmitters and receivers are also available separately.
Videography and content creation
XSW-D reliably records audio directly into a video camera via the mic input. The receiver attaches to the camera via the XSW-D cold-shoe mount and a 3.5 mm (1/8”) coiled cable, while the transmitter simply connects to a handheld or lavalier microphone depending on the use case and preference.
Videographers and content creators can choose between a Portable Lavalier Set complete with an ME 2-II clip-on microphone, a Portable Interview Set for use with an existing dynamic microphone, a Portable Base Set for use with an existing lavalier microphone, and the Portable ENG Set, which contains transmitters for a lavalier microphone (ME 2-II included) and an existing handheld dynamic microphone.
THD, total harmonic distortion: < 0.1 % Charging time: typ. 3 h Audio output: max. 12 dBu Operating temperature: -10 °C to +55 °C (14 °F to 131 °F) Signal-to-noise ratio: ≥ 106 dB Operating time: up to 5 h Modulation: GFSK with TDMA Battery Specification: Li-Ion Capacity: 850 mAh Codecs: aptX® Live Frequency range: 2,400 - 2,483.5MHz Max. Input voltage: typ. 5.0 V Transmission power: max. 10 mW Voltage: 3.7 V Operating relative humidity: 95 % (non-condensing) Latency: < 4 ms Temperature Range: 0 °C - 60 °C (32 °F - 140 °F) Audio frequency response: 3.5 mm Jack/XLR: 80 - 18,000 Hz6.3 mm Jack: 10 - 18,000 Hz
MKE 2 clip-on microphone (omni-directional) with windshield (metal shield not foam)