This kit sets your camera up to capture audio wirelessly with either a handheld mic (not included) OR a Lapel mic (Supplied), just plug it straight into your camera's 3.5mm jack to capture dialogue on a DSLR/Mirrorless easier than ever before.
• One touch ease-of-use
• 2.4 GHz digital transmission for worldwide operation
• 75m range (250ft) in optimal conditions
• Up to 5 hours battery life on a single charge
• Switch between multiple transmitters linked to one receiver
• Configure any combination of transmitters and receivers
• Mute from either transmitter or receiver
Excellent live sound.
XS Wireless 1 delivers acclaimed Sennheiser quality. Microphones with feedback protection and high-grade components yield an open, forceful sound. The receiver is an updated version that is designed to be easy to use. No lengthy set up – just go! These microphones and transmitters are proven classics – the result of decades of German engineering.
On stage, you have to put up with a lot of things – so does your equipment. XS Wireless 1 is built to last: Transmitters and microphones are sweat-resistant and withstand even the toughest stresses in everyday on-stage use.
Entry-level but well equipped
XSW-D employs digital transmission in the 2.4 GHz range and uses the acclaimed aptX® Live codec. The receivers have antenna diversity; the transmitters work redundantly, transmitting all data packages twice to ensure reliable transmission. In case of interference, the transmitter and receiver will seamlessly hop to a free frequency. The audio latency remains below 4 ms. Up to five systems can be used simultaneously and they have a range of up to 75 m (250 ft). The transmitter and receiver units can be conveniently recharged via USB using the included charging cable and work for up to five hours on a single charge.
Operation has been made as easy as possible via a single button: Pressing the buttons on both the transmitter and the receiver will power up and automatically link the units, clicking either button on the receiver or transmitter will mute the audio signal and pressing and holding both buttons again will power the system down.
The transmitter is connected to a handheld mic, a lavalier mic or an instrument, while the receiver can be directly connected to a mixing desk, a guitar or bass amp or the mic input of a video camera respectively.
Performing and presenting
Presenters, vocalists and instrumentalists can choose between a Vocal Set with an XS 1 dynamic cardioid microphone (NOT INCLUDED), a Lavalier Set with a clip-on microphone, and an Instrument Base Set for instruments with a 6.3 mm (1/4”) output (NOT INCLUDED).
Videography and content creation
XSW-D reliably records audio directly into a video camera via the mic input. The receiver attaches to the camera via the XSW-D cold-shoe mount and a 3.5 mm (1/8”) coiled cable, while the transmitter simply connects to a handheld or lavalier microphone depending on the use case and preference.
THD, total harmonic distortion: < 0.1 %
Charging time: typ. 3 h
Audio output: max. 12 dBu
Operating temperature: -10 °C to +55 °C (14 °F to 131 °F)
Signal-to-noise ratio: ≥ 106 dB
Operating time: up to 5 h
Modulation: GFSK with TDMA
Battery Specification: Li-Ion
Capacity: 850 mAh
Codecs: aptX® Live
Frequency range: 2,400 - 2,483.5MHz
Max. Input voltage: typ. 5.0 V
Transmission power: max. 10 mW
Voltage: 3.7 V
Operating relative humidity: 95 % (non-condensing)
Latency: < 4 ms
Temperature Range: 0 °C - 60 °C (32 °F - 140 °F)
Audio frequency response: 3.5 mm Jack/XLR: 80 - 18,000 Hz6.3 mm Jack: 10 - 18,000 Hz
|MKE 2 clip-on microphone (omni-directional) with windshield (metal shield not foam)||1|
|Charging USB Cable||1|
|Dual USB Plug (black)||1|
|Hot Shoe Adapter||1|
You can only record using one mic at a time.
Handheld mic not included, please see accessories.