Adding item to the basket...
Failed to add item to basket, please try again or contact support
Adding item to the basket... 
With the Ronin 4D, DJI's most advanced technologies have been integrated into one cutting-edge and comprehensive cinematography solution, which offers groundbreaking flexibility to solo cinematographers and unlimited possibilities for coordinated shooting.
| Description | Quantity |
|---|---|
| DJI Ronin 4D 6K with E Mount Adapter | 1 |
| - DJI Intelligent Battery TB50 | 2 |
| - DJI Quad Charging Hub with 2 Port Covers | 1 |
| - DJI Accessory Case | 1 |
| - Angelbird 512gb CFexpress SE Type B | 1 |
| - DJI Flat Head Screw Driver | 1 |
| - DJI 1.5mm Ball-End Hex Key | 1 |
| - DJI 2mm Ball-End Hex Key | 1 |
| - DJI 2.5mm Ball-End Hex Key | 1 |
| - DJI 3mm Ball-End Hex Key | 1 |
| - DJI Hand Grip Extended Control Grip | 1 |
| - DJI Mounting Screw 1/4 | 3 |
| - Generic Mains Lead (for Battery Charger) | 1 |
| - DJI Sun Hood (for High-Bright Remote Monitor) | 1 |
| - DJI High-Bright Monitor | 1 |
| - DJI High-Bright Monitor Mounting Cage (attached to Monitor) | 1 |
| - DJI Black Torx Bolt (attached to cage) | 8 |
| - DJI 1/4 Mounting Screw (attached to cage) | 2 |
| - DJI High-Bright Monitor Antenna | 8 |
| - DJI TB50 Charging Adapter | 1 |
| - DJI TB50 Battery Mount with 2 Securing Allen Bolts (attached to main unit) | 1 |
| - DJI Zenmuse X9-6K Gimbal Camera (main unit) | 1 |
| - DJI LiDAR Range Finder | 1 |
| - DJI Main Body (with Z-Axis) | 1 |
| - DJI DL Mount (with 2 caps & securing foot) | 1 |
| - DJI USB-C Cable | 1 |
| - DJI USB C-C cable for LiDAR | 1 |
| - DJI Handgrip | 2 |
| - DJI Handgrip Strap | 2 |
| - DJI Top Handle (with 4 securing thumb screws) | 1 |
| - DJI High-Bright Main Monitor (with connected cable & shoe mount) | 1 |
| - DJI CDX170-90 AC Adapter | 1 |
| - DJI Base Plate (with 3 securing screws, thumb screw & 2 clamps) | 1 |
| - DJI X9 106g Counterweight | 1 |
| - DJI E Mount (with supporting foot and front cap) | 1 |
| - DJI Zenmuse X9 Counterweight | 1 |
| - DJI WCH3 Battery Charger | 1 |
| - DJI NP-F Battery Plate (for High-Bright Remote Monitor) | 1 |
| - DJI Countersunk M3 Screws 6mm (for Zenmuse Counter Weight) | 4 |
| - DJI M2 4mm Screw | 2 |
| - DJI M3 9mm Screw | 4 |
| - DJI Memory Card Door (attached to main camera) | 1 |
| - Generic 3 Pin USB Plug | 1 |
| - DJI WB37 Battery Pack | 1 |
| - DJI M2 8mm Screw (for NP-F Battery Plate) | 4 |
| - Peli-Storm iM2750 Black Flight Case | 1 |
| - Sandisk Extreme Pro CFexpress Card Reader & USB Cable (C Type) | 1 |
| - DJI Pro SSD Mount | 1 |
| - DJI Screw for Pro SSD mount | 2 |
| - Hireacamera USB Drive (Containing Manual) | 1 |
| - Generic Plastic Tool Case | 1 |
| - DJI Battery Plate Connection Cover Screw (in place on rear of HighBright Monitor) | 4 |
| DJI PROSSD 1TB | 1 |
| - Generic Short USB C to C Cable | 1 |
| DJI Ronin / Inspire 2 TB50 Battery | 2 |
We recommend the use of Hedbox NPF batteries if you require additional power for the Hight-Bright monitor. Should you choose to take these batteries you will also require a Hedbox charger – see accessories.
DJI TB batteries are required for the camera, two are supplied as standard, additionals can be found in the accessories section.
The camera is equipped with a 3.5mm microphone port only and does not have an on-board XLR option. We would suggest the use of a field recorder (such as the Zoom H6) for audio capture.
Only compatible with certain lenses, if you are unsure, feel free to get in touch.
© 2003-2025 Hireacamera.com - all rights reserved
